Open the topology Examples/DHCP/DHCP.imn and you should see this:

DHCP example - topology picture.

Execute the experiment and position yourself in the Examples/DHCP/ folder. Run the command:

# ./start_dhcp

Right click on the pc3 node and use Wireshark to listen to the eth0 interface.

Double click on the pc3 node and run:

# dhclient eth0

To check if an IP address is assigned to the pc3 node, run:

# ifconfig eth0

Stop the Wireshark capturing and locate the DHCP packets generated by the script.

Last modified 5 years ago Last modified on Jan 3, 2014 9:55:42 AM

Attachments (2)

Download all attachments as: .zip